{"product_id":"cold-air-intake-kit-for-2010-2011-camaro-3-6l-v6","title":"Cold Air Intake Kit for 2010-2011 Camaro 3.6L V6 LLT","description":"\u003cp\u003eYour 2010–2011 Camaro LS\/LT 3.6L V6 LLT makes a respectable 304 hp from the factory — but the stock airbox is the bottleneck. GM designed the OEM intake with a sound-suppressing baffled resonator box that prioritizes cabin quiet over airflow. The result: restricted throttle response, muted induction sound, and leaving horsepower on the table.\u003c\/p\u003e\n\n\u003cp\u003eFlashark's cold air intake kit replaces the stock airbox with a Φ83 mm (3.27\") mandrel-bent aluminum intake tube, a high-flow dry cotton gauze conical filter, and a full-coverage stamped steel heat shield. On a stock LLT V6, expect 5–10 WHP and noticeably improved throttle response between 3,000–5,500 RPM. The induction sound becomes deeper and more aggressive on acceleration, while retaining near-stock cabin noise during cruise.\u003c\/p\u003e\n\u003cp\u003eInstallation uses factory mounting points — no cutting, no welding, no permanent modification. Budget 60–90 minutes with basic hand tools. The Camaro ECU automatically adapts to the increased airflow, so no tune is required for basic bolt-on use (though a tune unlocks additional gains when paired with exhaust headers).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eΦ83 mm (3.27\") Mandrel-Bent Aluminum Intake Tube \u003c\/strong\u003e— Black powder-coated finish for heat resistance and a clean OEM+ look under the hood. Larger than stock for reduced flow restriction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow Dry Cotton Gauze Conical Filter \u003c\/strong\u003e— Red Cone Filter, washable and reusable. Dry filter design protects the stock MAF sensor from oil contamination (unlike oiled filters).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull-Coverage Heat Shield\u003c\/strong\u003e — Stamped-steel heat shield isolates the filter from engine-bay heat, helping maintain lower intake air temperatures during sustained driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Reducer Connectors \u003c\/strong\u003e— 90° Φ76×Φ83 reducer and straight Φ83×Φ89 reducer ensure a sealed, vibration-free connection between the intake tube and the stock throttle body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Hardware Kit\u003c\/strong\u003e — 4× stainless steel worm-drive clamps, anti-vibration foam strip (1820 mm), aluminum mounting bracket, copper sleeve anchors, rubber washers, and all M6\/M8 fasteners included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Installation \u003c\/strong\u003e— Uses 2010–2011 Camaro V6 factory mounting points. No cutting, no welding, no permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Check Engine Light\u003c\/strong\u003e — Designed to retain correct MAF sensor positioning and crankcase ventilation hose routing on the naturally aspirated LLT V6.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e: FLIS25081\u003cbr\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum piping \u003cbr\u003e\u003cstrong\u003eTubing Diameter\u003c\/strong\u003e: 83 mm (3.27\")\u003cbr\u003e\u003cstrong\u003eTubing Finish\u003c\/strong\u003e: Black powder-coated\u003cbr\u003e\u003cstrong\u003eFilter Type\u003c\/strong\u003e: Dry cotton gauze\u003cbr\u003e\u003cstrong\u003eFilter Color\u003c\/strong\u003e: Red\u003cbr\u003e\u003cstrong\u003eFilter Reusability\u003c\/strong\u003e: Washable and reusable\u003cbr\u003e\u003cstrong\u003eHeat Shield Material\u003c\/strong\u003e: Stamped steel\u003cbr\u003e\u003cstrong\u003eVent Hose\u003c\/strong\u003e: 1× reinforced D19-d13 × 95 mm\u003cbr\u003e\u003cstrong\u003eMounting Hardware\u003c\/strong\u003e: Aluminum bracket + copper sleeve anchors + Rubber washers D27.8-d6.5×3 mm + M6\/M8 fasteners\u003cbr\u003e\u003cstrong\u003eClamps\u003c\/strong\u003e: 4× narrow-band worm-drive clamps\u003cbr\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: Approx. 3.8 kg\u003cbr\u003e\u003cstrong\u003eEstimated Install Time\u003c\/strong\u003e: 60–90 minutes\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003ePackage Includes\u003c\/h3\u003e\n\u003cp\u003e1× Φ83 mm Aluminum Intake Tube\u003cbr\u003e1× Dry Air Filter\u003cbr\u003e1× Stamped Steel Heat Shield\u003cbr\u003e1× 90° Reducer Connector Φ76×Φ83\u003cbr\u003e1× Straight Reducer Connector Φ83×Φ89\u003cbr\u003e5× Stainless Steel Worm-Drive Clamps\u003cbr\u003e1× Reinforced Vent Hose D19-d13 × 95 mm\u003cbr\u003e1x  Installation Hardware\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0293\/4423\/5619\/files\/Cold_Air_Intake_Kit_for_2010-2011_Camaro_3.6L_V6_1.jpg?v=1745375505\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Flashark","offers":[{"title":"Default Title","offer_id":51797436956958,"sku":"FLIS25081","price":118.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7171\/1262\/files\/IS25081.webp?v=1782569257","url":"https:\/\/platinumhpsolutions.com\/products\/cold-air-intake-kit-for-2010-2011-camaro-3-6l-v6","provider":"Platinum High Performance Solutions, LLC.","version":"1.0","type":"link"}