Products

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims o...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. C...

This easy to install full contact shim is perfect for PT Cruisers needing rear camber adjustment. SPC's fixed change shim will provide +.5deg of ca...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. C...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims o...

This full contact rear shim adds positive 0.75deg camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. B...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. C...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. C...

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the ta...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and re...

Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut a...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. ...

These truck sleeve will correct alignment problems on the F450 and F550 Super Duty trucks with Dana Super 60 solid axles. To split camber and caste...

Designed to adjust camber on the new Saturn "L" series cars, this arm is easy to install and provides rear camber adjustment for the life of the ve...

These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete wit...

Designed specifically for the S2000, this ball joint corrects camber on both the front and rear. An O.E. quality ball joint, this adjustable part c...

SPC Performance offers whole car Performance Kits for solving camber problems when lowering some of today's most popular vehicles. These kits allow...

Replace corroded or damaged OE toe cam bolts on the rear of the 2000 to 2009 Subaru Legacy, Outback and many more with this SPC cam. Get up to +-1....

Easily adjust rear toe on Subaru Legacy, Baha and Outback models with this adjustable control arm from SPC. This arm provides +-1.0deg change with ...

Fully adjust camber and toe on the rear suspension of your Subaru Outback, Legacy or Baja with this two arm kit from SPC. This kit offers a full +-...

Replace the worn bushing on the inboard side of the rear lower control arm on many Subaru models from the 2000's to present. Need the toe cam adjus...

Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside th...

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the s...

This kit replaces the outer bolt of the upper rear control arm and provides plus or minus 1deg of camber adjustment. Perfect for lowered vehicles o...