zzperformance

This is a refurbished LSJ intake manifold for our 2.2/2.4 supercharger kit. We start with a used OEM intake manifold, break it down to the core, ul...

This is a replacement set of O-rings for our ZZP 3800 intercooler system. These are for our updated short stack and Stage 2.5 intercooler core that...

These are stainless socket cap replacement bolts for your M90 supercharger. Make sure to select the intercooler thickness that you have or just sel...

We now carry two different version of the AEM Water/Methanol Injection Kit. We have a MAP (manifold absolute pressure) version and then a MAF (mass...

Phenolic is a heat insulative material. The ZZP intake spacer installs in 2.5 hours and keeps the intake from getting heat soaked from the engine....

This is an OEM stock replacement intercooler pump for your LF4 ATS-V. Includes bracket.

This is a clamp that will mount the Bosch intercooler pump virtually anywhere.

This is a replacement harness that will plug into the Bosch style intercooler pump or our ZZP stage 1 intercooler pump.Leads are both black, you wi...

This kit includes a reservoir, pressurized cap with relief valve that lets air out but not in. It's designed as such so that it makes bleeding the ...

Description The largest, most efficient, direct bolt in replacement upgrade intercooler made for the LNF Cobalt. The Standard core dimensions are 2...

5 ply silicone replacement couplers for 08+ Cobalt/HHR SS LNF. These replace the rubber factory pieces for the hot side of the intercooler system,...

This is a replacement O-ring gasket for your LSJ intake manifold end plate. This is the O-ring that goes around the laminova cores and seals betwee...

This kit comes with (8) O-rings, enough to replace all of them in an LSJ intake. We recommend greasing them before install to make it easier to sli...

This is a new stock replacement LSJ heat exchanger for your Cobalt SS or Ion Redline 2.0 liter. Overall core/end tank dimensions are: 23.5"x16.25"x...

Includes: Phenolic Spacer Plate 2 gaskets 10 longer bolts This is a phenolic spacer plate that installs between the intake manifold and superchar...

Comes as a complete kit with everything needed to install on your car except the mounting bracket. This kit will make it easier to bleed the air fr...

This is a bolt in bracket for the option B kit on your LSJ Cobalt or Ion. Fits over existing studs and requires no drilling into your car (Cobalt o...

Here it is - another simple bolt on upgrade for your 1.4 liter turbo Sonic. An inexperienced installer can install it within 2 hours. It comes with...

This is a silicone coupler for connecting the turbo to the upper charge tube. We sell two versions, one for the stock/ZFR turbos (center length 6")...

These are universal aluminum bends, made here in house at ZZPerformance on our mandrel bender. Full 2.5" OD bends made from .083 wall 6061 aluminum...

3 piece pre-sealed aluminum core Dual pass front mount heat exchanges Intercooler Pump 2 Garlock supercharger gaskets All hoses needed for install...

This is a custom hand built heat exchanger that is intended for when you add a liquid to air intercooler to your W-Body. They are bolt in with no c...

The culmination of 20+ years of R&D on the 3800/W-Body platform has brought us here, our ZZP Supercore. Our supercore builds upon our previous ...

The aluminum IC core is 22x8x3.5". The intercooler kit comes with a 50mm blow off valve. The tubing is TIG welded aluminum that is wrinkle black po...