dieselsite

IPR Lock Nut Loose IPR nut can allow the solenoid to move freely causing false signal of injector oil pressure. This can result in stalls when goin...

GASKET AND REPLACEMENT BOLTS INCLUDED!*max torque on bolts- 100in/lbs. Do not exceed.* If you've ever tried to change out your thermostat in the Po...

DIESELSITE boots are designed to replace leaking and deteriorated sets on the 7.3L Ford PSD light duty diesels. Our boots are made of a more durab...

DIESELSITE boots are designed to replace leaking and deteriorated sets on the 6.0L Ford PSD light duty diesels. Our boots are made of a more durab...

Allow 100% fluid flow to the cooler when deleting your cooler bypass tube! WHY REMOVE MY BYPASS TUBE?: From 1999-2003 the Ford 4R100 automatic t...

DIESELSITE boots are designed to replace leaking and deteriorated sets on the 7.3L Ford PSD light duty diesels. Our boots are made of a more durab...

Dieselsite's new stud kit for the 7.3L makes installing valve covers and gaskets even easier and less prone to leaking. Full engagement in head ...

Extend the life of your transmission efficiently and economically! THE ISSUE WITH COOLING: Thousands of automatic transmissions fail every year...

Dieselsite 1996-2001 FORD 7.3L LOWER WATERPUMP INLET   INCLUDES OEM GASKETFor use with all stock waterpumps - replaces lower inlet neck on 96-2001...

This Dieselsite (now in 409 Stainless Steel) up-pipe kit was designed to replace the poorly designed OEM standard equipment up-pipes and gaskets th...

DIESELSITE INTAKE PLENUM BOOTS This kit includes the two boots that connect the intake manifold piping ("Spider") to the intake plenums on 19994-...

Powerstroke Turbo Blanket   Fitment: ** WILL NOT FIT WITH FACTORY EBV STILL IN PLACE- MUST BE DELETED** 1994-1997 TP38 stock Ford 7.3L Turbo, non-w...

Dieselsite Adrenaline High Pressure Oil Pump The Adrenaline™ High-Volume High-Pressure Oil Pump is the ultimate solution for any injector setup. Th...

Dieselsite Boost Relief Valve ELIMINATE the SES light caused by OVERBOOST. NOW WITH BOOST GAUGE PORTS TO MONITOR MAP AND ACTUAL BOOST! The SES lig...

************ CAUTION:  THIS PAGE IS FOR REPLACEMENT BOOTS ON THE AFTERMARKET BANKS INTERCOOLER SETUPS ONLY. ************ DIESELSITE boots are desi...

Dieselsite Fuel Heater   Made of Stainless Steel, this Heater is completely automatic. No switches or monitoring required. Dieselsite has built a...

 Billet 6-stud Multi-Disc Converter Dieselsite's Hercules Torque Converter for the 7.3L E4OD/4R100 and 6.0L 5R110.Built for the daily driver to 100...

Dieselsite High Volume LPOP   *The gears must be installed correctly! Inner gear marked "damper" or "out" side with the DEEPER RELIEF faces toward...

Lower Radiator Hose – International Water Pump (1995.5–2003 7.3L) These Lower Radiator Hoses are specially designed for 1995.5–2003 7.3L Powerstrok...

Intake Manifold (1994.5-Early 1999) Powerstroke Specifics: Stainless steel construction Mounting provisions for wastegate controller if needed. Th...

Dieselsite Replacement Fuel Filter – CPR, OBS CPR & 6.7L Water Separator Keep your fuel system running clean and efficient with the Dieselsite...

This gauge takes the guesswork out of changing your replacement spin on filter for the DIESELSITE External Transmission Filter Kit. It is clearly m...

E4OD / 4R100 / 5R110 300M ADVANCED ALLOY BILLET INPUT SHAFT Made from 300M billet steel. Heat treated and precision ground. Shaft is rated to 2000...

Billet Output Shaft TCS has added to it's lineup of heavy duty 4R100 ('95 & On) components the 4×4 output shaft. Manufactured at TCS from 300M...