2026 - Current 2-Door Strut Kit for Polaris Ranger 1000, XP1000 and Kinetic

*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***

*** A 23/64" drill bit is required to install the rivet nuts***

Compatibility -

- All 2026 and up 2-door 1000, XP1000 and Kinetic Polaris Rangers including Northstar models. (Not compatible with the front of crew models) There is separate kit listed for the front doors of 2019-2026 crew models.

Get rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time. You can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. It pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.

All door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.

Brackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets have three positions to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces. 

All door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.

US Patent # 12,090,822

Made in USA.

*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***