80-96 Bronco BILLET Stock Width 3.0" Shock Front & Rear Package (Long Travel)

This package includes the Stock Width Front Kit paired with the Complete Rear Long Travel Kit. This is one of the most popular and common setups offered. This stock width long travel kit provides of 17” of wheel travel and clears a 35” tire with stock fenders.  The beams are modified to correct camber, plating and truss are installed for reinforcement, and uniball pivots provide better articulation. A mild drop pitman arm is provided to correct any extreme steering angles with the increase in ride height. We use King's 3.0x12” IBP coil over shocks to provide superior dampening with our spec'd valving and mount into place using our Bronco front shock hoop and billet aluminum engine crossover. Also included are new alignment cams, our stainless steel extended brake line kit, and limit straps. Lastly, our redesigned Billet Radius Arms finish off the front this kit. In the rear we include Deaver's Q80 spring paired with our style bushing which uses a larger head allowing for more flex when the rear is articulated. We use a fabricated shackle and rear hanger to allow the new spring maximum wheel travel and droop without leaf separation. Our upper billet rear shock mount bolts straight into place while the lower mounts weld to the axle housing in order to mount the provided King 3.0x12" 3 tube bypass shock under the floorboard. To control all the increased travel, our rear sway bar kit is included which drastically increases drive ability on and off-road. 

Note: Professional install is highly recommended to ensure optimum performance and safety. This kit requires welding. All vehicles require alignment not included after lift install. Beam core charge of $500 is included in price. If you supply us with a core in good condition we are happy to issue a refund for the core amount.

Features:

• Complete long travel package
• 3-5” of lift
• Provides 17” of travel in the front
• Provides 17" of travel in the rear
• Better front end articulation
• TTB Plating and Uniball Pivots
• No need for fiberglass fenders
• High performance coil over and bypass shocks with Desolate Motorsports spec'd valving
• Front shock configuration fits up to a 3.0x12" coil over
• Clears 35” tire
• Drastically improves handling while increasing wheel travel
• Reduces body roll with our sway bar kit

What’s Included: Front:

• Desolate Motorsports Shock Hoops & Billet Engine Cross Over
• Level 2 TTB with added plating, integrated bash guard, 1″ Uniball pivot conversion (Pair)
• Desolate Motorsports Billet Aluminum Radius Arm with 1.25″ FK JMX series heims (Set)
• Radius Arm Frame brackets, Cross bar, and hardware
• Mild Drop Pitman Arm (1)
• King Shocks 3.0x12” IBP Coil Over with Remote Reservoir (Pair)
• King Shocks 2.0x2" Bump Stops with Cans (Pair)
• Bump Stop Mounting Plates (Set)
• Alignment cams (2)
• Desolate Stainless Front Brake Hose Kit (1)
• Limit Strap (2)

Rear:

• Deaver Q80 and Shackle Combo w/ Fabricated Shackle Hangers and Front Spring Mount (Pair)
• King Performance Race Series 3.0x12” 3 Tube Bypass Shocks (Pair)
• Desolate Motorsports Billet Upper Shock Mount and Lower Rear Shock Mount Combo (1)
• Desolate Motorsports Rear Sway Bar Kit (1)
• Axle Perches (Pair)
• Bump Pads (Pair)
• U-Bolts (Set)
• Stainless Rear Brake Line (1)
• All Necessary Hardware