Cold Air Intake Kit for 2012-2015 Chevrolet Camaro 3.6L V6

Breathe easy. This Flashark cold air intake system replaces the restrictive factory airbox on your 2012-2015 Chevrolet Camaro 3.6L V6 with a high-flow intake tract that pulls cooler, denser air from the engine bay. The result is improved throttle response, enhanced acceleration feel, and a subtle induction sound under hard acceleration.

The system features a black powder-coated aluminum intake tube, a reflective heat shield to block engine bay radiant heat, and a high-flow red oiled cone filter. Everything needed for installation is included—remove the factory airbox, bolt on the new intake, and you're done.

Technical Specifications

Key Features

High-Flow Aluminum Intake Tube — The black powder-coated aluminum pipe replaces the convoluted factory intake tract with a smooth, mandrel-bent tube that minimizes airflow restriction. The larger diameter allows the 3.6L V6 to breathe more freely, especially during hard acceleration when the engine demands maximum air volume.

Reflective Heat Shield — Engine bay temperatures can exceed 200°F under load. The included reflective heat shield wraps around the filter element, blocking radiant heat from the engine and keeping incoming air as cool as possible. Cooler air is denser, meaning more oxygen per cylinder for better combustion and power.

High-Flow Oiled Filter — The red oiled cotton gauze filter element provides superior filtration efficiency while maintaining high airflow capacity. The multi-layer cotton gauze construction traps fine particles while allowing maximum air passage. Oil the filter with the included filter oiler during installation and re-oil after each cleaning.

Complete Bolt-On Installation — No cutting, no drilling, no permanent modifications. This kit includes the intake tube, heat shield, filter, all couplers and clamps, and hardware. The entire install takes 30-45 minutes with basic hand tools.

Improved Throttle Response — By eliminating the factory airbox's restriction and long flex hose, the engine responds more directly to your right foot. The 3.6L V6 feels livelier, especially in the mid-range where the factory tune leaves room for improvement.

Subtle Induction Sound — Under light acceleration, the intake is barely noticeable. Under full throttle, you get a satisfying muffled induction roar that makes the Camaro sound more aggressive without being obnoxious. The factory exhaust note pairs well with the enhanced intake sound.

FAQ

Q: Will this fit my 2014 Camaro SS with the 6.2L V8?
A: No — this kit is designed specifically for the 3.6L V6 (LFX engine code). The V8 uses a different intake tract and throttle body size. We do not recommend cross-fitting.

Q: Do I need to tune my car after installing this?
A: No tuning is required for the 3.6L V6. The factory ECU handles the increased airflow well within its adaptive parameters. No check engine light should occur on a properly functioning vehicle.

Q: How often do I need to re-oil the filter?
A: Clean and re-oil the filter every 15,000-20,000 miles, or sooner if you drive in dusty conditions. Never run the filter dry — always re-oil after cleaning.

Q: Will this trigger a check engine light?
A: Should not trigger a CEL on a stock or mildly modified vehicle. If a CEL appears, check for an air leak at the throttle body connection or the MAF sensor housing.

Q: Does the heat shield actually make a difference?
A: Yes — the reflective heat shield reduces the temperature of incoming air by blocking radiant heat from the engine block and exhaust manifold. On a hot day the difference can be 20-40°F, which improves air density and combustion efficiency.

Q: How does this compare to the factory airbox?
A: The factory airbox is designed for noise suppression and filtration efficiency, not maximum airflow. This intake prioritizes airflow with a larger-diameter tube and a high-flow filter element, trading some filtration surface area for reduced restriction.