Bass Package 2 X SLC-MD12 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 250 Watts Rms
Bass Package 2 X SLC-MD12 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 250 Watts Rms is backordered and will ship as soon as it is back in stock.
Confirm vehicle fitment
Confirm vehicle fitment
Confirm fitment before ordering. Match the year, make, model, trim, engine, drivetrain and selected options shown on this page. If any detail is unclear, search your exact vehicle or contact us before checkout.
Shipping expectations
Shipping expectations
Availability and processing time can vary by manufacturer. Available shipping choices and charges appear at checkout. Tracking is emailed after shipment. Oversized, special-order and supplier-shipped items can require additional processing time.
Returns and cancellations
Returns and cancellations
Please review eligibility before purchase. Installed, used, electronic, custom, special-order and clearance items may have return restrictions. Contact us promptly if you need to change or cancel an order.
What’s included
What’s included
The product description and selected variant determine what is included. Items shown in lifestyle or installation photos are not included unless they are specifically listed in the description.
Bass Package 2 X SLC-MD12 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 250 Watts Rms is backordered and will ship as soon as it is back in stock.
Buy with confidence
Verify fitment, selected options, availability and included components before checkout. Secure payment options and order confirmation are provided at checkout.
Description
Description
DS18 LSE-212A Bass Package 2 X SLC-MD12.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 1000 Watts
Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE212A! This is a prefabricated box that comes with a pair of some of our best selling subwoofers. Included is a beautiful carpeted box with DS18 designs tuned to 35 hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The subs included are the very popular MD12.4's that are single voice coil 4 ohm subs wired in parallel for a final nominal impedance of 2 ohms that will require 500w rms. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.
Highlights
- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 35hz for low hitting bass.
- Two SLC 12 inch subs will give you the cone area to push out great sounding bass without a lot of power requirements.
- Great design and carpeting with DS18 logos to give your system the flair it deserves and also brings a show quality look.
What's in the package?
-
S-1500.1 AMPLIFIER
| Amplifier | |
| Circuit Topology | Class AB Monoblock Amplifier |
| RMS Power Output @ 2 OHMS | 350 watts |
| RMS Power Output @ 4 OHMS | 220 watts |
| Total Harmonic Distortion | < 3% |
| S/N Ratio Ref 1w @ 4 OHMS | >90db |
| Gain Range | 0.2-6V |
| Crossover Range | 50-250hz |
| Frequency Range | 20Hz-500 Hz |
| Dimensions | 13.7/348mm x 5.8/148mm x 1.8 / 47.5mm |
- 4-GA AMP KIT - 500 WATTS
- AGU Fuse Holder With AGU-100A
- 6ft. 4GA Loom Tube
- Rubber Grommet
- 17ft. Red Power Cable: 21mm² OD: 10mm
- 3ft. Black Ground Cable: 21mm² OD: 10mm
- 17ft. Red/Black Twisted RCA Cable
- 17ft. Turn-On Cable: 20*0.15mm
- 17ft. Red/Black Speaker Cable: 1.31mm² x 2 wires OD 3.2 x 6.4mm
- SLC-MD12 IN A PORTED BOX
| Model: | SLC-MD12 |
| Type: | Subwoofer |
| Size: | 12" |
| RMS Power: | 250W |
| MAX Power: | 500W |
| Impedance: | 4 |
| Voice Coil Size: | 2" |
| Magnet: | Ferrite |
| Magnet Size: | 42oz |
Technical Details
| General | |
| Speaker Size | 2 x 12" |
| Total Impedance | 2 ohms |
| Total RMS Power Handling | 500 watts |
| Total MAX Power Handling | 1000 watts |
| Sensitivity (1w/1m) | 96db |
| Frequency Response | 29-250hz |
| Recommended Lo Pass Crossover | 80 Hz |
| Subwoofer | |
| Voice Coil Diameter | 50.8mm (2) |
| Voice Coil Former Material | Aluminum |
| Winding Material | ACCAW |
| Cone Material | PPI |
| Surround Material | Rubber |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 42oz |
| Box Specifications | |
| Port Tune | 35hz |
| Dust Cap Material | 45.3L |
| Load Configuration | Front Ported |
| Box Material | 1/2" MDF |
| Finish Material | Vinyl |
| Measurements | |
| Height | 13.78 / 350mm |
| Width | 38.58" / 980mm |
| Depth 1 | 11 / 280mm |
| Depth2 | 14 / 356mm |

Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product features
Use this section to highlight specific product features to your customers.
Product comparison grid
Add content here to explain a bit about the range of products on offer and which ones may be most suitable for your customers.




