Flex Fuel Upgrade Kit For Unlocked & Tuned Can-Am Maverick R

This upgrade path is specifically designed for existing EVP Maverick R X85 Rising Rate Tuning customers who are looking to transition to a full Flex Fuel Tuning setup. By integrating a Flex Fuel sensor and module, your vehicle can automatically adjust its calibration based on the ethanol content in the fuel tank, ranging from 91/93 pump gas to E85.

Critical Upgrade Requirements

Before proceeding with the Flex Fuel flash, ensure your Maverick R meets the following hardware and software criteria:

• CodeShooter Device: An EVP CodeShooter ECU Flashing Device is mandatory for all tuning options on this page.

• Silicone Charge Tubes: You must have EVP Silicone Charge Tubes installed.

  • Installation Note: The tuning requires a boost-only reference. You must use the auxiliary port on the charge tube that sees boost pressure only. Do not tap into the BOV vacuum/boost port for this specific tuning requirement.

• Existing Software: This specific page/upgrade is only for those who already have the X85 Rising Rate base file.

Alternative Upgrade Paths

If your Maverick R does not currently have the X85 Rising Rate tune, please follow the appropriate link or contact method below:

Why Flex Fuel?

Upgrading to Flex Fuel eliminates the need to manually swap maps when changing fuels. The system communicates with the ECU to optimize timing and fueling in real-time, providing:

• Convenience: Fill up with pump gas or E85 without touching your CodeShooter.

• Safety: The ECU automatically scales back performance if you get a "bad" tank of E85 with low ethanol content.

• Performance: Maintains the high-output "Rising Rate" characteristics of the X85 tune while on high-ethanol blends.

Technical Support: If you are unsure which tune is currently loaded on your MG1 ECU, you can check your "My Tunes" section in the CodeShooter 2.0 app or call the EVP support line for verification.